How to Get Rid of Mold in Shower Caulk

How to Get Rid of Mold in Shower caulk? Due to warm and moist condition of shower – which is perfect for mold and mildew to thrive; they become a common problem in most bathrooms.  The best way to get rid of this problem is by keep bathroom humidity down. Keep proper circulations of air to reduce the humidity and lower the chances of mold to develop. You can keep the door open or open bathroom window after your shower or turn on an exhaust fan.

how to get rid of mold in shower

Tips on How to Get Rid of Mold in Shower caulk

Regardless of best efforts, mold and mildew can still present occasionally.  They are easily recognize from their color, either black, brown or shades of pink and they often appear as streaks, spots or solid colored areas.  The caulk or grout lines of a shower or a tub are the most common place for mold and mildew to appear. How to Get Rid of Mold in Shower caulk or grout? There are effective ways to clean these areas and get rid of the mold.  But, firstly you should check with the tub manufacturer to make sure that you use cleaners that are approved for use on those surfaces.  Using cleaners they don’t approve can void a warranty.

how to get rid of mold in shower grout

Make a solution of 50/50 of bleach and water is one of the easiest ways to get rid of mold and mildew in shower caulk. Spray the solution down the area affected by mold or mildew and rinse out afterward.  However you should be very careful because bleach is acid and therefore it should not sit on surfaces for an extended time period as it could cause discolored or damage on your wall. If you prefer a more natural ingredient to get rid of mold in shower caulk or grout, you can try using vinegar. Vinegar works great in killing mold and mildew and is a natural deodorizer.  Nature mild acidic contained in vinegar makes tan unfriendly environment to future mold and mildew growth as well as get rid of any musty odor. You can also use tea tree oil because it acts as natural anti fungal that can fight mold and mildew well.  Carefully apply tea tree oil in the affected areas and leave it for 10-15 minutes before you gently wipe it off.

For removing stubborn mold and mildew, old-fashioned elbow grease will work well.  Use cleaning scrub solution with bleach and a wash cloth. Apply them directly onto the grout or caulk line and gently scrub the affected area. Let it sit for 10-15 minutes and then clean it thoroughly with water. For a complete removal, repeat the step a few times. Note that scrubbing too hard can damage the caulking and may cause it breaking apart or peeling away. If all of removal methods above are not able to get rid of mold and mildew in shower caulk, it means that the mold may have been growing underneath the caulking.  For this problem, you may need a completely remove and replace the caulking. The problem can be also a sign that there is excess moisture occur; therefore beside fixing and replacing the caulking, you can also find the mold source of and repair that. Hopefully these tips on How to Get Rid of Mold in Shower is helpful.

 

(Visited 27 times, 1 visits today)