How to Fix Toilet Leaking at Base

Toilet Leaking at Base is one of the common toilet problems anyone can fix it by themselves. Some plumbing problems need a professional plumber to repair them, but there are a lot of simple plumbing repairs you can make yourself and saving expense and time. Here are all the basic things you need to know to fix Toilet Leaking at Base on your own.

toilet leaking at base

Toilet Leaking at Base and Other Common Easy-To-Solve Toilet Problems

Before you fix any Toilet Leaking or other toilet problems, you better understand how a toilet works. Lift off the toilet tank lid and flush the toilet two or three times; you will see that when you push the flushing handle, the chain lifts the tank ball so that water in the tank flows into the toilet bowl and forces water in the toilet bowl into the drain. When the tank is empty, the tank balls closes and the fill valve refills water to the tank. Once the tank is full, it shuts off the fill valve.

toilet leaking from bottom of tank

If your Toilet Leaking At Base and there is water on the floor around the toilet, you should fix it right away so moisture won’t damage the subfloor. Check the tank bolts, the mounting nut of fill valve and coupling nut of supply tube. If everything is tight, you probably need to replace the washers. Leaking at Base can be caused by a cracked toilet base or by a wax ring that no longer seals. If the toilet tank cracks, you may have to purchase a new one. If Toilet Leaking At Base occurs after or during a flush, you should replace the wax ring with a new one.

Fixing Toilet Leaking at Base

Leaking at Base can cause damage to the bathroom and your wallet. If you notice a leak at the base of your toilet, you need to fix the problem right away. Here is how to fix Toilet Leaking at Base:

  • Remove the plastic caps that wrap the bolts at the toilet base.
  • Tighten the bolts with a wrench.
  • Flush the toilet. If the toilet is still leaking, tighten the bolts with a wrench as in mentioned in step two.
  • Close the water inlet that is located on the wall behind the toilet.
  • Flush the toilet and clean it with a towels and a sponge
  • If your toilet is not one-piece toilets, unscrew the bolts that hold the tank to the bowl then remove it and set it aside.
  • Remove the plastic caps at the toilet base, unscrew flange bolts with the wrench, and remove the nut and any washers.
  • Remove the toilet bowl, turn it over and clean the wax ring off with a putty knife. Put the new wax ring to the outlet hole. Insert new bolts into the flange. Turn the toilet bowl back and make sure that the flange bolts and the holes in the base of the bowl are aligned
  • Attach the tank to the toilet. Apply plumber’s goop to the threads on the inlet of the tank. Turn the water on. Allow the tank to fill and then flush. Check if there is still Toilet Leaking at Base.
(Visited 113 times, 1 visits today)