How to Prep Walls for Painting your favorite room? Painting can be tasking since it may take a couple of hours to a day or more to do – depends on how big the room is that you want to paint. However, the result is fantastic, because you can change the look or freshen up a room in a short time by giving a new coat of paint. If the room you are going to paint is quite big, break it into smaller jobs and spread them out over a couple of weeks. Doesn’t matter what size of the job you are going to tackle, the painting techniques and How to Prep Walls for Painting remain the same.
How to Prep Walls for Painting; Step By Step
If you are painting a new wall, you can skip these tips of How To Prep Walls steps. But if you are painting a wall that have been previously painted, search for rough, chipped or peeling areas.
- Step 1. Put the draperies and the drapery hardware down. Remove all the furniture from the room to find flaws or group the furniture in one area and cover them; also cover the floors with drop cloths. Loosen the light fixtures then wrap them with plastic bags. Fix flaws you find.
- Step 2. After fixing all flaws you find, clean wall surface to be painted by washing it down using warm water, a sponge and wall cleaning soap or household detergent to remove dust, airborne dirt, grease, stain and cigarette smoke. Wet the sponge slightly and go over about 2 feet wide of wall in a vertical strip. Squeeze sponge to take dirty water out into a separate container and rinse it in clean water. Repeat the step once more to ensure that all dirt is gone as well as detergent residue. Now you have provided a good wall surface for a new paint coat.
- Step 3. Try out the color first. It is the best way to choose a color because you usually cannot choose the right color only based on looking at the color swatch from the store catalogue. Test a few paint colors on a piece of wood, take a color sample if possible and place it against the wall and see how it works in the room and with the room’s lighting.
- Step 4. If the color is already perfect, now you can start painting the wall. If you only need to refresh the wall with the same paint type and paint color, you don’t need to apply a primer to the whole wall surface. Apply paint primer before painting if you are switching paint type (e.g. glossy to matte) or paint colors, or if you are painting bare surfaces. Paint primers create a better bond for new paint, balance out defects and repairs and also save you money on paint. Paint primers make covering easier.
Although prepping walls for painting may look like a lot of work, the final result is worth the effort! Once you have followed the four steps on How To Prep Walls For Painting, you are ready to paint!